If you are assigning a permanent IP address to the Epson printer, it is advised that dip switch 8 on the interface module by switched to off once the address has been set. Your email address or other details will never be shared with any 3rd parties and you will receive only the type of content for which you signed up. If you need a hard worker that’s easy to use and versatile, this is the ideal impact receipt printer. An Epson TM-U printer with an ethernet interface, a roll of paper and a printer ribbon. Watch our How-to video on YouTube! The Type IV adapter can replace the existing adapter and is held in place by 2 screws.

Uploader: Shakahn
Date Added: 1 April 2012
File Size: 57.97 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 26250
Price: Free* [*Free Regsitration Required]

Log in Not signed in yet?

Epson TM-UB (BC): Ethernet, PS, EDG – Epson

RJ Epsno connector on computer and adapter end. Re-install the cover with the single screw. Connect a computer directly to an Ethernet printer using a crossover cable For example if the printer was set to Select the Ethernet port in use u20. These numbers are important when configuring the adapter- It is advisable to make a note of these values in a secure place.

You can unsubscribe at any time with a click on the link provided in every Epson newsletter. Press the ‘Submit’ button when done.

How to connect an Epson POS printer with Ethernet Interface

A older, cheaper or gigabit newer ethernet switch and two ethernet cables. WH Wall hanging bracket C32C After proper set-up you should be able to open and talk to the printer directly. The Ethernet adapter has not been configured to work on your local network. You can directly connect a printer with an Ethernet interface to a computer using a crossover cable not the same as a patch cable.

You are commenting using your WordPress. Good luck and thank you Mark and Steve! The utility will then locate the printer on epskn Ethernet network and create the port.

How to configure an Epson TM-U220 printer with ethernet to be used with the Dominos Pulse system

Generally speaking the adapter must be in the same sub domain as the computer to be able to log on see previous section for how to configure the PC to the same subdomain.

Alternatively, you can download the files nehwork Epson.

Register now We respect your privacy. Don’t forget to make the same changes on the computer side to maintain connectivity.

The configuration report will now print. Labels with both the MAC address and serial number are affixed to the module. There are problems with the computer or network. The printer should print out the following diagnostic page showing current ethernet port settings.

Using a web browser, type the default IP address found on a label on the interface card into the address field of your web browser. Confirm the connection of the power supply unit or the voltage of the commercial power.

Quick Links

Set DIP switches as necessary; then attach the access cover. Take a small screwdriver or ball point pen and for a slow count to three, press on the button in the little hole on the ethernet port plate also circled in red. After printing, don’t forget to return DIP switch 1 to the off position. What you need to know How to change the IP address netqork the computer. The TM printer is ntework off. Once the printing starts, you can let go of the page feed button. Verify that the interface is “serial” for this type of Ethernet adapter.

The Ethernet adapter is reset when you press the ‘Reset’ button. The configuration screen should appear.

Wait for the green LED on the module to start blinking!